西北太平洋低纬度区域海水中溶解氨基酸的分布及组成研究   总被引：1，自引：1，他引：0  

张宁  陈岩  高先池  杨桂朋 《海洋科学》2020,44(5):60-70

本文对2018年秋季西北太平洋低纬度区域上层海洋(5~200 m)中溶解氨基酸(THAA)的分布和组成进行了研究。结果表明,该海域表层海水中THAA的浓度范围为0.40~0.97μmol/L,平均浓度为0.58±0.14μmol/L;5~200m垂直断面上THAA的平均浓度为0.59±0.16μmol/L,范围为0.30~1.05μmol/L。调查海域内THAA浓度明显低于中国近海,在5~200m内的垂直分布基本表现出随深度增加而增加的趋势。将表层和垂直水体中的THAA分别与DOC、Chla等环境因子进行相关性分析,结果显示均无显著相关性。西北太平洋低纬度区域海水中的优势氨基酸是天冬氨酸(Asp)、谷氨酸(Glu)、丝氨酸(Ser)、甘氨酸(Gly)、苏氨酸(Thr)和丙氨酸(Ala)。基于氨基酸的碳归一化产率(THAA-C%)、降解因子(DI)值,表明该海域表层海水中的有机质降解程度较高,且随深度的增加而降低。  相似文献   

鱼类疫苗浸泡免疫策略优化的研究现状     

姚海静  韩高尚  高迎莉 《海洋科学》2020,44(10):133-142

疫苗是一种针对特定疾病并改善免疫者免疫力的生物制剂。疫苗能刺激免疫者的免疫系统产生特异性免疫反应和非特异性免疫反应，提高免疫者的抗病能力，达到免疫保护的效果。浸泡免疫是鱼类特有的免疫接种方法，该方法能简化人工操作、减少工作强度、降低鱼体应激、刺激鱼体的黏膜系统，可在短时间内完成大量的免疫工作。正确的疫苗使用有助于提高疫苗的效果。作者对鱼类黏膜免疫机制、鱼类疫苗浸泡免疫方式、浸泡免疫策略优化的方法、浸泡免疫面临的问题以及浸泡免疫的发展趋势等进行综述，以期为鱼类病害防治和鱼体免疫增强的研究提供新思路和新策略。  相似文献   

Environmental impact of fluidized solidified silt casting on surrounding water bodies     

Yunquan Li  Silin Wu  Shi Shu  Yiyan Lv  Yan Cui 《Marine Georesources & Geotechnology》2020,38(5):604-610

Abstract

With the growing demand for underwater refill engineering, the construction technology of implementing fluidized solidification in underwater pouring has recently received increased attention. However, the environmental impact of underwater casting on surrounding water bodies, especially when the silt is polluted, is still unclear. In this study, a simulated underwater pouring test and a static immersion release test were conducted separately to study the quality of the surrounding water during and after pouring. The results showed that fluidized-solidified silt casting could increase the pH of the surrounding water, even after the pouring had stopped, by approximately 1.0 and the turbidity could reach 200 NTU. No diffusion of Zn and Cu into the surrounding water was observed and while Ni and Cr exhibited slight diffusion, this was at a level well below international water quality standard. During construction, reducing the distance from the seafloor to the bottom of the pouring catheter could reduce the level of pollution. After construction, the use of neutral solidified materials can effectively reduce the pH of the surrounding water and the potential risk of heavy metal dissolution.  相似文献   

ICESat-2激光卫星与光学遥感影像融合水深测量          下载免费PDF全文

曹彬才  方勇  江振治  高力  胡海彦 《海洋测绘》2020,40(5):21-25

针对浅海测深的数据特点和应用需求,以我国南海甘泉岛为例,研究了利用ICESat-2(Ice,Cloud,and Land Elevation Satellite-2)激光卫星数据和光学遥感影像开展主被动融合水深测量的方法。首先通过信号点提取、水面/水底识别、水下点折射改正等步骤处理ICESat-2数据,获得水深值,随后以激光点作为控制,计算光学水深反演模型参数,最后由点及面地获取大范围高精度水深。实验表明,甘泉岛区域主被动融合测深中误差优于1.30m,基于激光卫星数据的主被动融合测深方法能够为浅水水深测量提供新手段。  相似文献   

海洋调查测量信息系统(一):硬件部分          下载免费PDF全文

范龙  王川  邓玉芬  张博  孙磊  刘传勇  高飞 《海洋测绘》2020,40(3):73-77

在调查测量船的设计论证过程中,针对调查测量设备信息综合处理和任务指挥控制的需求,基于对调查测量船典型装备配置及能力的分析,提出了由软硬件两部分组成的调查测量信息系统,设计了由数据采集分发平台、声学同步控制模块和数据远程通信模块组成的系统硬件部分,实现了调查测量信息的集中采集、实时分发、远程传输,以及调查测量作业的同步控制,有效保证了调查测量船装备布局的统一性和科学性,为海上同步高效作业能力的生成提供了硬件保障。  相似文献   

Cu2+对序批式反应器中活性污泥胞外聚合物产量及其组分的影响     

李姗姗  朱四富  马丙瑞  于娜玲  赵长坤  信帅帅  潘云浩  吴淑妍  武原原  高孟春 《中国海洋大学学报(自然科学版)》2020,(2):107-115

研究了长期暴露条件下Cu2+对序批式反应器(SBR)性能及其活性污泥胞外聚合物(EPS)特性的影响。结果表明,进水中加入10 mg·L-1的Cu2+后,在SBR运行的第16~55天,COD和NH+4-N的去除率保持稳定;在第56~75天,COD和NH+4-N的平均去除率与进水Cu2+浓度为0 mg·L-1时相比分别下降了3.88%和6.41%。浓度为10 mg·L-1的Cu2+长期作用下,活性污泥中EPS、松散附着EPS(LB-EPS)和紧密附着EPS(TB-EPS)产量及LB-EPS和TB-EPS中蛋白质(PN)含量增加。傅里叶变换红外光谱分析表明10 mg·L-1 Cu2+的长期暴露导致TB-EPS中PN的C=O键、N-H键和C-O键相对含量降低。X射线光电子能谱(XPS)测试结果显示在10 mg·L-1 Cu2+长期暴露条件下,LB-EPS和TB-EPS中元素Cu和O百分含量增加。  相似文献   

Space Changes in the Rural Tourism Area of Mufu Town,Hubei Province,China     

TAO Hui  GAO Jing  CHEN Kaiqiang 《资源与生态学报(英文版)》2020,11(6):633-644

In a society dominated by tourism consumption, space changes occurring in rural areas can generally reflect their social changes. On the theoretical basis of flow, regeneration and adaptation of rural tourism space, this paper originally and creatively proposes that the spatial elements in a rural tourist area can be classified into three categories: Attractions (A), Towns (T) and Villages (V). By analyzing the spatial transformation characteristics of A, T and V, five types of rural spatial transition modes are found, the types of heritage, theme park, those serving as scenic spots, leisure industrial clusters and ecotourism areas. These different classes emerge due to their geographical differentiation. They show the same spatial evolution trend: The Attractions are distributed throughout the whole area and characterized by diversification; supporting services facilities gather in the Towns; and the Villages are landscape images. In this area the traditional rural benefit trends toward that of compound development. Mufu Town, Hubei province, is taken as a study case, and the changing characteristics of A, T and V from 2006 to 2016 are described. Problems in the process of establishing the new spatial order are considered. In order to realize the synergy between production space, living space and ecological space, the interactive development between Attractions, Towns and Villages is recommended. The perspective of Attraction-Town-Village (ATV) can lead to a better understanding of the situation of tourism space in rural areas and provide directions for thinking about the reconstruction path for the modernization of traditional societies.  相似文献   

RELOCATION OF THE 23 NOVEMBER 2017 WULONG M_S5.0 EARTHQUAKE SEQUENCE AND ANALYSIS OF ITS SEISMOGENIC FAULT          下载免费PDF全文

LI Cui-ping  TANG Mao-yun  GUO Wei-ying  HUANG Shi-yuan  WANG Xiao-long  GAO Jian 《地震地质》2019,41(3):603-618

The Wulong M_S5.0 earthquake on 23 November 2017, located in the Wolong sap between Wenfu, Furong and Mawu faults, is the biggest instrumentally recorded earthquake in the southeastern Chongqing. It occurred unexpectedly in a weak earthquake background with no knowledge of dramatically active faults. The complete earthquake sequences offered a significant source information example for focal mechanism solution, seismotectonics and seismogenic mechanism, which is helpful for the estimation of potential seismic sources and level of the future seismic risk in the region. In this study, we firstly calculated the focal mechanism solutions of the main shock using CAP waveform inversion method and then relocated the main shock and aftershocks by the method of double-difference algorithm. Secondly, we determined the seismogenic fault responsible for the M_S5.0 Wulong earthquake based on these calculated results. Finally, we explored the seismogenic mechanism of the Wulong earthquake and future potential seismic risk level of the region. The results show the parameters of the focal mechanism solution, which are:strike24°, dip 16°, and rake -108° for the nodal plane Ⅰ, and strike223°, dip 75°, and rake -85° for the nodal plane Ⅱ. The calculations are supported by the results of different agencies and other methods. Additionally, the relocated results show that the Wulong M_S5.0 earthquake sequence is within a rectangular strip with 4.7km in length and 2.4km in width, which is approximately consistent with the scales by empirical relationship of Wells and Coppersmith(1994). Most of the relocated aftershocks are distributed in the southwest of the mainshock. The NW-SE cross sections show that the predominant focal depth is 5~8km. The earthquake sequences suggest the occurrence features of the fault that dips northwest with dip angle of 63° by the least square method, which is largely consistent with nodal planeⅡof the focal mechanism solution. Coincidentally, the field outcrop survey results show that the Wenfu Fault is a normal fault striking southwest and dipping 60°~73° by previous studies. According to the above data, we infer that the Wenfu Fault is the seismogenic structure responsible for Wulong M_S5.0 earthquake. We also propose two preliminary genetic mechanisms of "local stress adjustment" and "fluid activation effect". The "local stress adjustment" model is that several strong earthquakes in Sichuan, such as M8.0 Wenchuan earthquake, M7.0 Luzhou earthquake and M7.0 Jiuzhaigou earthquake, have changed the stress regime of the eastern margin of the Sichuan Basin by stress transference. Within the changed stress regime, a minor local stress adjustment has the possibility of making a notable earthquake event. In contract, the "fluid activation effect" model is mainly supported by the three evidences as follows:1)the maximum principle stress axial azimuth is against the regional stress field, which reflects NWW-SEE direction thrusting type; 2)the Wujiang River crosscuts the pre-existing Wenfu normal fault and offers the fluid source; and 3)fractures along the Wenfu Fault formed by karst dissolution offer the important fluid flow channels.  相似文献   

AN EXPERIMENTAL STUDY ON THE PROCESS OF INTERGRANULAR PRESSURE SOLUTION OF PLAGIOCLASE GOUGE UNDER HIGH TEMPERATURE AND PRESSURE: METHOD AND PRELIMINARY RESULTS          下载免费PDF全文

ZHANG Shu  HE Chang-rong 《地震地质》2019,41(4):1012-1026

To understand the mechanism of lower-crust earthquake and slow slips, it is necessary to study the frictional properties of mafic rocks and their major rock-forming minerals. Previous studies have performed a series of experimental researches on gabbro, basalt and their major constituents. According to the results of previous experiments, frictional sliding of plagioclase under hydrothermal conditions(100~600℃)shows a property of velocity weakening, and the experimental results show that both the direct rate effect parameter(a)and the healing effect parameter(b)increase with temperature, a typical feature for thermally-activated processes. Velocity weakening means property of a shear band that has a stronger friction healing effect than the direct rate effect in the rate and state friction constitutive framework, and the healing effect(b value)in constitutive relation mainly reflects the increase in contact area with time under hydrothermal conditions, with some minor effect of structural changes. Since the microphysical mechanism of feldspar minerals at the contacts is mainly brittle cataclasis for temperatures below 600℃, the significant frictional healing effect in this case can only be explained by the mechanism of pressure solution. In order to determine if the dissolution process of plagioclase actually occurs on the laboratory time scale, we conducted hydrostatic experiments on plagioclase powder samples under hydrothermal conditions whereby frequent contact switch between particles seen in frictional sliding experiments can be avoided, making the observation on the dissolution sites possible. Experimental temperatures were 400℃ and 500℃, with confining pressure of 90~150MPa, pore pressure of 30MPa, with 2mm initial thickness of fault gouge. The mechanical data show that a creep process occurred in the plagioclase fault gouge in the experimental temperature and pressure range; and the microstructures of the experiment show that precipitation of new grains is prevalent as the product of pressure solution process between plagioclase particles. At the same time, it is observed that the contact points have an appearance similar to fused, fuzzy structure as signatures of dissolution. The results of our experiments provide a definite experimental evidence for the healing mechanism in friction of plagioclase and for the theoretical relation between unstable slip and the pressure solution process. The results of the experiments are summarized as follows: (1)Drainage rate of pore water in plagioclase gouge was high in the first few hours of experiment, but gradually decreases over time for both temperature and pressure series of experiments slowing down to a steady state. This feature indicates that there is a creep process that evolves inside the plagioclase gouge. In the temperature-series experiments, the drainage rate of the pore water in the plagioclase gouge at 400℃ is relatively low than the cases for higher temperatures. Thus, the applied temperature is positively correlated with the creep of plagioclase gouge. (2)Scanning electron microscopy(SEM)observations of the experimentally deformed samples were performed on thin sections cut along the sample axis. Firstly, from the images of microstructure, it was found that the degree of particle fracture became more significant at a higher effective pressure, with smaller pore volume between particles. In the temperature-series experiments it was found that the degree of compaction of plagioclase gouge increased with increasing temperature. Precipitation of plagioclase grains in layered structures was generally observed in high-magnification images, indicating the presence of pressure solution processes. Contact points were also found to be in a state of ambiguity that seems to be a fused morphology, but the details of the structure remain to be determined by further observations. The above results indicate that the pressure solution process of plagioclase particles can occur on a typical laboratory time scale, and the results of this study provide robust experimental evidences for the theory that links between pressure solution and the mechanism of frictional healing and unstable slips for plagioclase.  相似文献   

2013年岷县—漳县6.6级地震地磁垂直分量日变化低点时间空间分布特征     

戴勇  高立新  姚丽  朱培育  格根  王磊 《地震》2019,39(3):106-114

2013年6月16日, 中国大陆西部出现地磁低点位移。 异常出现后一个月内, 位于低点位移分界线附近发生7月22日岷县、 漳县交界6.6级地震。 本文通过采用实测低点时间减去理论低点时间的方法剔除低点时间经度效应, 并以剔除经度效应后低点时间为0 h的等值线作为低点位移分界线, 2013年岷县—漳县6.6级地震震中处于6月16日地磁低点位移分界线上。 对异常期间的中国大陆地区地磁垂直分量日变形态进行统计, 发现其存在显著的分区特征, 低点时间为正的区域内日变化形态基本呈现W型, 低点时间为负的区域内日变化形态主要呈现V字型特征。 低点位移异常日期间, 中国大陆存在显著的高梯度带, 本文采用梯度值定量描述低点时间空间变化程度。 在6月13日正常日期间, 中国大陆地区未出现梯度值大于1.5 h/(°)的区域, 在6月16日异常日期间, 出现梯度值大于1.5 h/(°)的区域, 2013年岷县—漳县6.6级地震位于高梯度区边缘。  相似文献